Quote

“,$_POST[‘comments’]);

$pagename=$_POST[‘pagename’];

$strBody = “Submited information

“;
$strBody.=”Name : “.$name.”

Email : “.$email.”

Phone : “.$phone.”

City : “.$city.”

State : “.$state.”

“;

$measurea = (float)$_POST[‘measurea’];
$measureb = (float)$_POST[‘measureb’];
$measurec = (float)$_POST[‘measurec’];
$measured = (float)$_POST[‘measured’];
$measuree = (float)$_POST[‘measuree’];
$measuref = (float)$_POST[‘measuref’];
$measureg = (float)$_POST[‘measureg’];
$measureh = (float)$_POST[‘measureh’];

$inchesPadding = 2;
$costPerSqFoot = 14.5;
$fpCostPerInch = .3;
$costPerOutOfSquare = 25;
$costPerHole = 25;
$costPerHingeCutout = 60;

$sqFeet;
$linearInches;
$numOutOfSquare;
$numHoles;
$numVNotches;
$numCornerNotch;

$sqFeetCost;
$fpCost;
$outOfSquareCost;
$holeCost;
$hingeCost;
$vNotchCost;
$miterCost;
$cornerNotchCost;

$hingeTopDesc;
$hingeTopQt;
$hingeTopCost;

$hingeBottomDesc;
$hingeBottomQt;
$hingeBottomCost;

$handleDesc;
$handleQt;
$handleCost;

$sealDesc;
$sealCost;

$numClips;
$clipCost;

$numSwivelWallClips;
$swivelWallClipCost;

$headerDesc;
$headerQt;
$headerCost;

$numCornerClamps;
$cornerClampsCost;

$numHeaderCorners;
$headerCornerCost;

$installationCost;

$asQuotedImageUrl;
$upgradeHtml;

if($pagename==”DoorTypes-SingleMount”)
{
$subject = ‘cafsd.com Single Door Only Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

“;

$sqFeet = (($measurea + 2)*($measureb + 2)) / 144;
$linearInches = ($measurea * 2)+($measureb * 2);
$numOutOfSquare = 1;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$installationCost = 200;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/SingleMount.jpg”;
}
elseif($pagename==”DoorInline_panel_left”)
{
$subject = ‘cafsd.com Door with Inline Panel Left Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

“;

$sqFeet = (($measurea + 2)*($measureb + 2)) / 144;
$linearInches = ($measurea * 2)+($measureb * 4);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$numClips = 3;

$installationCost = 200;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/inline_panel_left.jpg”;
}
elseif($pagename==”DoorInline_panel_right”)
{
$subject = ‘cafsd.com Door with Inline Panel Right Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

“;

$sqFeet = (($measurea + 2)*($measureb + 2)) / 144;
$linearInches = ($measurea * 2)+($measureb * 4);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Header Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 95;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$headerDesc = ‘Top Header’;
$headerQt = 1;

if($measurea > 60) {
$headerCost = 150;
} else {
$headerCost = 105;
}

$installationCost = 200;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/inline_panel_right.jpg”;

$upgradeHtml = “

If you do not wish to use a header across the top there would be an upgrade charge of $400-$500.

“;
}
elseif($pagename==”DoorBetween_InlinePanels”)
{
$subject = ‘cafsd.com Door Between Inline Panels Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

“;

$sqFeet = (($measurea + 4)*($measureb + 2)) / 144;
$linearInches = ($measurea * 2)+($measureb * 6);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Header Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 95;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$headerDesc = ‘Top Header’;
$headerQt = 1;
$headerCost = 1.73*$measurea;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$installationCost = 225;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/InlinePanels.jpg”;

$upgradeHtml = “

If you do not wish to use a header across the top there would be an upgrade charge of $400-$500.

Keep in mind this type of shower enclosure needs to have wood support directly behind the clips that support the door and fixed panel. See guideline sheet.

“;
}
elseif($pagename==”Door_with_top_transom”)
{
$subject = ‘cafsd.com Door With Top Transom Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

“;

$sqFeet = (($measurea + 4)*($measureb + 2)) / 144;
$linearInches = ($measurea * 4)+($measureb * 2);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;
$numVNotches = 2;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$numSwivelWallClips = 2;
$swivelWallClipCost = 46;

$sealDesc = “Steam Seal Kit”;
$sealCost = 75;

$installationCost = 300;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/top_transom.jpg”;

$upgradeHtml = “

Add a Fixed Panel To Handle Side of Door

Similar to the shower enclosure above with a fixed panel on the handle side of the door (in other words the door will still hinge from the tile wall), add $300-$400 to the As Quoted Price

(To include a standard towel bar on the added fixed panel, add $125)

Add a Fixed Panel to Both Sides of the Door

Using similar hardware to the picture above with a fixed panel on either side of the door and a movable transom above Add $700-$900 to be As Quoted Price

“;
}
elseif($pagename==”Door_with_notched_inline_panel”)
{
$subject = ‘cafsd.com Door With Notched Inline Panel Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

“;

$sqFeet = (($measurea + 4)*($measureb + 2)) / 144;
$linearInches = ($measurea * 2)+($measureb * 4);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;
// TODO: edge Notch

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$numClips = 3;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$installationCost = 200;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/notched_inline_panel.jpg”;

$upgradeHtml = “

For the As Quoted price you must have additional wood support in wall behind the top hinge. See #1-#4 on guidelines sheet.

If you do not have the wood support needed it would become necessary for you to have a header support bar across the top.

Doing the shower enclosure with the header on top is generally very close to the same price as the Quoted price. One of the benefits of the header system as it allows you to swing the door from either side.


“;
}
elseif($pagename==”Door_with_cropped_fixed_panel”)
{
$subject = ‘cafsd.com Door With Cropped Fixed Panel Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

“;

$sqFeet = ((($measurea + 2)*($measureb + 2)) / 144) + (($measureb + 2 – $measurec) * ($measured + 2) / 144);
$linearInches = ($measurea * 2)+($measureb * 2)+(($measureb – $measurec)*2)+($measured * 2);
$numOutOfSquare = 2;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$numClips = 3;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$installationCost = 200;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/cropped_fixed_panel.jpg”;
}
elseif($pagename==”Door_with_notched_90_degree_panel”)
{
$subject = ‘cafsd.com Door With Notched 90 Degree Panel Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

Measurement E : “.$_POST[‘measuree’].”

“;

$sqFeet = ((($measurea + 2)*($measureb + 2)) / 144) + ((($measuree + 2)*($measureb – $measured + 2)) / 144);
$linearInches = ($measurea * 2)+($measureb * 4)+($measuree * 2);
$miterCost = ($measureb -$measured) * 2 * 1.25;
$numOutOfSquare = 2;
$numHoles = 6;
$numHingeCutouts = 2;
$numCornerNotch = 1;
$cornerNotchCost = 75;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$numClips = 3;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$numCornerClamps = 2;
$cornerClampsCost = 75;

$installationCost = 325;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/notched_90_degree_panel.jpg”;
}
elseif($pagename==”Door_with_full_90_degree_inline_panel”)
{
$subject = ‘cafsd.com Door With Full 90 Degree Inline Panel Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

“;

$sqFeet = ((($measurea + 2)*($measureb + 2)) / 144) + ((($measurec + 2)*($measureb + 2)) / 144);
$linearInches = ($measurea * 2)+($measureb * 4)+($measurec * 2);
$numOutOfSquare = 2;
$numHoles = 6;
$numHingeCutouts = 2;
$miterCost = $measureb * 2 * 1.25;

$hingeTopDesc = “Top Wall Mounted Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 110;

$hingeBottomDesc = “Bottom Curb Mounted Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 95;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$numClips = 3;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$numCornerClamps = 2;
$cornerClampsCost = 75;

$installationCost = 325;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/full_90_degree_inline.jpg”;

$upgradeHtml = “

For the As Quoted price you must have additional wood support in wall behind the top hinge. See #1-#4 on guidelines sheet.

If you do not have the wood support needed it would become necessary for you to have a header support bar across the top.

When using a header support bar around the top in place of the clips and wall-mounted hardware you could save between $100 – $200 off the As Quoted Price depending on the size and hardware color.

You also have the option of adding an additional fixed panel on the front side of the shower and you can hinge the door from either side.
Shown here with Oil Rubbed Bronze Hardware which can cost as much as 10% more than other finishes.

If you have the wood support behind the tile that is needed but do not want to use the header support system you can do your shower enclosure similar to the picture above but keep in mind this can add anywhere from $700-$1000 to The As Quoted Price

“;
}
elseif($pagename==”Door_neo_angle_panels”)
{
$subject = ‘cafsd.com Neo-Angle Door And Panels Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

“;

$sqFeet = ((($measurea > 0 ? $measurea + 2 : 0) + $measureb + ($measurec > 0 ? $measurec + 2 : 0)) * ($measured + 2)) / 144;
$linearInches = $measurea + ($measureb*2) + $measurec + ($measured*4);
$numOutOfSquare = 2;
$miterCost = $measured * 2 * 1.25;
$numHoles = 2;
$numHingeCutouts = 2;

$hingeTopDesc = “Top Header Mounted Pivot Hinge”;
$hingeTopQt = 1;
$hingeTopCost = 95;

$hingeBottomDesc = “Bottom Curb Mounted Pivot Hinge”;
$hingeBottomQt = 1;
$hingeBottomCost = 90;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$headerDesc = “Top Header Support Bar”;
$headerQt = 1;
$headerCost = 150;

$numHeaderCorners = 2;
$headerCornerCost = 38;

$installationCost = 300;

$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/Door_neo_angle_panels.jpg”;

$upgradeHtml = “

Using the header around the top perimeter of the shower enclosure is the recommended method and most stable way of installing a Neo angle shower Enclosure.

Although it is not recommended if the fixed panels are small enough you could do a Neo-Angle Shower enclosure without the header around the top. The fixed panels would need to be increased in thickness to 1/2” glass while keeping the door 3/8” glass to cut down on weight. This method of installation can cost between $400 and $600 more then the As Quoted Price. This is due to all the additional notches, glass fabrication, and additional labor.

NOTE: This type of insulation does require the additional wood support be added behind the tile directly where the fixed panel will attach to the wall to support the weight of the door.

You may have what is known as a 2/3 Neo angle shower similar to the picture you see. When getting a quote for this type of shower enter a 0 on either the A measurement or the C measurement.

“;
}
elseif($pagename==”DoorTypes-NeoAngle-4fixed-panels-half-walls”)
{
$subject = ‘cafsd.com neo-Angle angle with 4 Fixed Panels on Half Walls Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

Measurement E : “.$_POST[‘measuree’].”

Measurement F : “.$_POST[‘measuref’].”

Measurement G : “.$_POST[‘measureg’].”

Measurement H : “.$_POST[‘measureh’].”

“;

if($measureh > 0) {
$sqFeetSide1 = (($measureh + 2 + $measuree) * ($measureb + 2 – $measurec)) / 144;
$linearInchesSide1 = (($measureb – $measurec)*2) + (($measureh + $measuree) * 2);
$miterCostSide1 = ($measureb – $measurec) * 2 * 1.25;
$numOutOfSquareSide1 = 2;
}

if($measureg > 0) {
$sqFeetSide2 = (($measureg + 2 + $measuref) * ($measureb + 2 – $measured)) / 144;
$linearInchesSide2 = (($measureb – $measured)*2) + (($measureg + $measuref) * 2);
$miterCostSide2 = ($measureb – $measured) * 2 * 1.25;
$numOutOfSquareSide2 = 2;
}

$sqFeetDoor = (($measurea + 2) * ($measureb + 2)) / 144;
$sqFeet = $sqFeetSide1 + $sqFeetSide2 + $sqFeetDoor;

$linearInchesDoor = $measureb*2 + $measurea*2;
$linearInches = $linearInchesSide1 + $linearInchesSide2 + $linearInchesDoor;

$miterCost = $miterCostSide1 + $miterCostSide2;

$numOutOfSquare = $numOutOfSquareSide1 + $numOutOfSquareSide2;
$costPerOutOfSquare = 20;

$numHoles = 2;
$numHingeCutouts = 2;

$headerDesc = ‘Header’;
$headerLinearInches = $measurea;
if($measureh > 0) {
$headerLinearInches += $measureh + $measuree;
}
if($measureg > 0) {
$headerLinearInches += $measuref + $measureg;
}
$headerQt = 1;
$headerCost = $headerLinearInches * 1.75;

$numHeaderCorners = ($measureh > 0 && $measureg > 0) ? 2 : 1;
$headerCornerCost = ($measureh > 0 && $measureg > 0) ? 38 : 18;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$hingeTopDesc = ‘Top Pivot Hinge to Header’;
$hingeTopQt = 1;
$hingeTopCost = 95;

$hingeBottomDesc = ‘Bottom Pivot Hinge’;
$hingeBottomQt = 1;
$hingeBottomCost = 90;

$installationCost = ($measureh > 0 && $measureg > 0) ? 350 : 300;

$asQuotedImageUrl = ($measureh > 0 && $measureg > 0) ? “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/DoorTypes-NeoAngle-4fixed-panels-half-walls.jpg” : “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/DoorTypes-NeoAngle-4fixed-panels-half-walls_2_thirds.jpg”;
}
elseif($pagename==”DoorTypes-NeoAngle-knee-walls”)
{
$subject = ‘cafsd.com Neo-Angle with Knee Walls Right and Left Estimate Request’;
$strBody.=”Color of the fixtures in your bathroom : “.$_POST[‘color’].”

Measurement A: “.$_POST[‘measurea’].”

Measurement B : “.$_POST[‘measureb’].”

Measurement C : “.$_POST[‘measurec’].”

Measurement D : “.$_POST[‘measured’].”

Measurement E : “.$_POST[‘measuree’].”

Measurement F : “.$_POST[‘measuref’].”

“;

if($measured > 0) {
$sqFeetSide1 = (($measured + 2) * ($measureb + 2 – $measuref)) / 144;
$linearInchesSide1 = (($measureb – $measuref)*2) + ($measured*2);
$miterCostSide1 = ($measureb – $measuref)* 1.25;
$numOutOfSquareSide1 = 1;
}

if($measurec > 0) {
$sqFeetSide2 = (($measurec + 2) * ($measureb + 2 – $measuree)) / 144;
$linearInchesSide2 = (($measureb – $measuree)*2) + ($measurec*2);
$miterCostSide2 = ($measureb – $measuree)* 1.25;
$numOutOfSquareSide2 = 1;
}

$sqFeetDoor = (($measurea + 2) * ($measureb + 2)) / 144;
$linearInchesDoor = $measureb*2 + $measurea*2;

$numHoles = 2;
$numHingeCutouts = 2;

$sqFeet = $sqFeetSide1 + $sqFeetSide2 + $sqFeetDoor;
$linearInches = $linearInchesSide1 + $linearInchesSide2 + $linearInchesDoor;
$miterCost = $miterCostSide1 + $miterCostSide2;
$numOutOfSquare = $numOutOfSquareSide1 + $numOutOfSquareSide2;

$headerDesc = ‘Header’;
$headerQt = 1;
$headerCost = ($measured + $measurea + $measurec) * 1.75;

$numHeaderCorners = ($measured > 0 && $measurec > 0) ? 2 : 1;
$headerCornerCost = ($measured > 0 && $measurec > 0) ? 38 : 18;

$handleDesc = “Handle 8 in”;
$handleQt = 1;
$handleCost = 55;

$sealDesc = “Seal Kit”;
$sealCost = 50;

$hingeTopDesc = ‘Top Pivot Hinge to Header’;
$hingeTopQt = 1;
$hingeTopCost = 95;

$hingeBottomDesc = ‘Bottom Pivot Hinge’;
$hingeBottomQt = 1;
$hingeBottomCost = 90;

$installationCost = 300;

if(($measuref == 0 && $measured > 0) || ($measuree == 0 && $measurec > 0)) {
$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/DoorTypes-NeoAngle-knee-walls_with1full.jpg”;
} elseif(($measuref == 0 && $measured == 0) || ($measuree == 0 && $measurec == 0)) {
$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/DoorTypes-NeoAngle-knee-walls_2_thirds.jpg”;

$upgradeHtml = “

If you want to hinge the door on the same side as the fixed panel that is on top of the half wall/tub deck you would need to use a header across the top (similarto the picture above).

If you have solid wood behind the wall the door would hinge from and you can plan to hinge the door from the wall like the picture you could have the shower enclosure with out the top header. The price for this type of installation would be about the same either way as long as you know there is wood for the top hinge.

“;
} else {
$asQuotedImageUrl = “http://cafsd.com/Images/ImagesUsedOnPages/AsQuoted/DoorTypes-NeoAngle-knee-walls.jpg”;

$upgradeHtml = “

Option No Header on the top: This type of installation is not recommended on the Neo-Angle style shower enclosures. Because of the shape of a Neo-Angle shower enclosures the door hangs at an angle causing the glass to flex and bend the fixed panel, this makes it unstable. Over time it could cause the panels of glass to bang together and either chip or break one or both of them. However if this is what you truly want to have, ADD $700-$1,000 to the “As Quoted Price”. The reason for this is the most expensive part of a frameless shower enclosure is the glass fabrication and the hardware. The fixed panels need to be upgraded to 1/2 inch glass to help make them more ridged. Also it will add 2 to 3 hours of labor to the installation.

“;
}
}

$strBody.=”Comments : “.$comments.”

“;

$sqFeetCost = $sqFeet*$costPerSqFoot;
$fpCost = $linearInches*$fpCostPerInch;
$outOfSquareCost = $numOutOfSquare*$costPerOutOfSquare;
$holeCost = $numHoles*$costPerHole;
$hingeCost = $numHingeCutouts*$costPerHingeCutout;
$clipCost = $numClips * 15;
$vNotchCost = $numVNotches * 35;

$fabricationTotal = $sqFeetCost + $fpCost + $outOfSquareCost + $holeCost + $hingeCost + $vNotchCost + $miterCost + $cornerNotchCost;
$hardwareTotal = $handleCost + $hingeTopCost + $hingeBottomCost + $sealCost + $clipCost + $headerCost + $swivelWallClipCost + $cornerClampsCost + $headerCornerCost;
$taxes = ($fabricationTotal + $hardwareTotal)*0.035;
$quote = $fabricationTotal + $hardwareTotal + $installationCost + $taxes;

$showGuardUpgrade = ($sqFeet*8.50) *1.035;

setlocale(LC_MONETARY, ‘en_US’);

$strBody .= ‘

Quote
Glass Fabrication: $’. number_format($fabricationTotal, 2, ‘.’, ”) .’
Hardware: $’. number_format($hardwareTotal, 2, ‘.’, ”) .’
Installation: $’. number_format($installationCost, 2, ‘.’, ”) .’
Tax: $’. number_format($taxes, 2, ‘.’, ”) .’
Total Installed: $’. number_format($quote, 2, ‘.’, ”) .’

‘;

$strBody .= ‘

Glass Fabrication
Square Feet: ‘. number_format($sqFeet, 2, ‘.’, ”) .’ $’. number_format($sqFeetCost, 2, ‘.’, ”) .’
FP: ‘. number_format($linearInches, 2, ‘.’, ”) .’ $’. number_format($fpCost, 2, ‘.’, ”) .’
Miter: ‘. ‘ $’. number_format($miterCost, 2, ‘.’, ”) .’
Holes X: ‘. $numHoles .’ $’. number_format($holeCost, 2, ‘.’, ”) .’
Out of Sq X: ‘. $numOutOfSquare .’ $’. number_format($outOfSquareCost, 2, ‘.’, ”) .’
Corner notch: ‘. $numCornerNotch .’ ‘. number_format($cornerNotchCost, 2, ‘.’, ”) .’
Hinge-cut-outs: ‘. $numHingeCutouts .’ $’. number_format($hingeCost, 2, ‘.’, ”) .’
V-Notches: ‘. $numVNotches .’ $’. number_format($vNotchCost, 2, ‘.’, ”) .’

‘;

$strBody .= ‘

Hardware
Header: ‘. $headerQt .’ $’. $headerCost .’
‘. $handleDesc .’: ‘. $handleQt .’ $’. $handleCost .’
‘. $hingeTopDesc .’: ‘. $hingeTopQt .’ $’. $hingeTopCost .’
‘. $hingeBottomDesc .’: ‘. $hingeBottomQt .’ $’. $hingeBottomCost .’
‘. ‘Corners’ .’: ‘. $numHeaderCorners .’ $’. $headerCornerCost .’
Channel Clips: ‘. $numClips .’ $’. $clipCost .’
90 deg Corner Clamps: ‘. $numCornerClamps .’ $’. $cornerClampsCost .’
‘. $sealDesc .’: $’. $sealCost .’
Swivel Glass to Wall Clips: ‘. $numSwivelWallClips .’ $’. $swivelWallClipCost .’

‘;

if($code==$verificationCode)
{

$from=$email;

$headers = ‘MIME-Version: 1.0’ . “\r\n”;
$headers .= ‘Content-type: text/html; charset=iso-8859-1’ . “\r\n”;
$headers .= ‘From:’.$from;
mail($to, $subject, $strBody, $headers);
}
else
{
header(“location:”.$errorURL);
}
}

?>



Shower Doors Moorestown NJ, Glass Shower Doors, Enclosure, Swedesboro Bathroom Renovation


Quote: $

To upgrade to 3/8″ “Showerguard Glass” add an additional $

Never heard of “Showerguard Glass”? Click here to learn more.

Please take a look at our Guideline Sheet

All showers are quoted based on normal out of square wall conditions. Meaning the walls are flat but not necessarily plumb or level. Large Humps or dips in the wall that would create excessive gaps would have additional waterjet cutting charges of $100 per side. All pricing is based on a single-family residence up to the second floor with direct access driveway parking. Center City row homes and high-rise condominiums would have an additional charge based on parking availability, parking fees, distance from truck to residents, etc.

Prices may vary: Normal out of square charges are added into the estimate however at the time of the final measure If the walls are level and plumb you could save money off the quoted price. These prices are to give you a fairly accurate estimate of what your shower enclosure could cost. However until I see the actual finished product it is very difficult to give a firm price. There are some unforeseen variables a computer program will not be able to calculate.

HomeAbout CAFSD  | Areas Serviced | Gallery of Past Work | Customer Referrals | Door Types | Terminology | F.A.Q | Glass Care |
Useful Information | Product LinksContractor Referrals | Contact CAFSD

New Jersey State Home Improvement Contractor License Number:

Licensed, Bonded and Insured